Nuclear Power Plant Explosion

Video Clips. Duration : 0.87 Mins.

Nuclear Power Plant Explosion

Pyro56857's first viveo... plumbers putty used for power plant.

Nuclear Power Plant Explosion

Nuclear Power Plant Explosion

Nuclear Power Plant Explosion

Nuclear Power Plant Explosion

No URL Nuclear Power Plant Explosion

Avoid Granite Countertop Problems With Trapped Appliances, Granite Sinks and Milled Backsplash

Granite Countertop installation problems and solutions

"Trapped Appliances, Composite sinks aka Granite Sinks and Milled backsplash"

Trapped Dishwashers
Trapped dishwashers happen when flooring is installed "up to" cabinet bases, as opposed to having the cabinets set on top of the finished floor. An alternative is to use inexpensive plywood to raise the cabinets up to the height of the finished floor. This is good for new installations but too late if your cabinets are already installed on the sub floor.

We get this call about once a quarter. It's not an everyday problem. It is frequent enough to warrant awareness. Unfortunately the solution is always expensive. You have to sacrifice the counter or the floor in order to get the dishwasher out. After replacing the dishwasher you usually still have the same problem. Living in fear of appliance failure is not an easy feeling. Unless the cabinets are set at the same elevation as the finished floor this is a distinct possibility.

When your dishwasher fails, you will suffer a 0 or more repair or replace cost just for the dishwasher. The additional costs of flooring or countertop replacement can be avoided with proper planning. It's like adding salt to the wound in that to correct the problem permanently, you have to tear the kitchen apart. Prevent this by insisting that the cabinets are at the same elevation as the finished floor.

Composite-Granite Sinks
Granite or composite sinks such as Blanco and Swan sinks require silicone instead
of plumbers putty to mount the strainer or other fixtures to the sink or the sink to the stone. The sinks can and do stain from Plumbers putty. The manufacturers themselves
will tell you not to use plumbers putty to mount the strainer/garbage disposer.

Some plumbers will use plumbers putty to mount sprayers, instant-hots and other
assorted deck mounted items. This will stain the stone. The answer is silicone.

Milled Backsplash
Customers that want thin (2 centimeter) backsplash should select thin stone. Cutting 3 centimeter stone into 2 centimeter is risky and time consuming and expensive. Our stone is not priced to include thin milling. The reason why marbles come in 2 centimeter and 3 centimeter is that it's possible. The reason why most granite species are 3 centimeter thick is because if cut into 2 centimeter slabs, the percentage that break under its own weight is too high for the quarry to remain profitable. If the quarry is not willing to make it in 2 centimeter, why would we, or you, or your customer, want to take the risk?

Solutions:
1) Select a 2 centimeter stone instead of 3 centimeter. Understand the limitations of the material. Not all stone can be milled thin without breaking.
2) Cut and remove the drywall to recess the backsplash, by the thickness of the drywall.
3) Select a sink and faucet combination that actually fits the cabinet as opposed to cramming more items then actually fit the space.
4) Be honest with your self. If your bathroom is not big enough to accept a cabinet that is deep enough to allow the sink + faucet + the backsplash at the full thickness of the slab you choose. You may have to settle for a smaller sink bowl than you might have liked.
5) A tile backsplash instead of a solid piece of stone backsplash may match the rest of the bathroom better and solve the clearance problems?

Avoid Granite Countertop Problems With Trapped Appliances, Granite Sinks and Milled Backsplash

Plumbers Putty

Avoid Granite Countertop Problems With Trapped Appliances, Granite Sinks and Milled Backsplash

Avoid Granite Countertop Problems With Trapped Appliances, Granite Sinks and Milled Backsplash
Avoid Granite Countertop Problems With Trapped Appliances, Granite Sinks and Milled Backsplash

Plumbers Putty


Pyro56857's first viveo... plumbers putty used for power plant.

Keywords:

What Kinds of Tools Do Plumbers Use?

Plumbers use plumbing tools that are specialized to fit the job. Professional plumbing tools are designed to perform a wide variety of functions that include: measuring, accessing holes, cutting pipe, soldering tightening and loosening, and more. Below is a list of the kinds of tools plumbers use:

Level: Known as "levelness," a level gives the plumber the ability to make adjustments in the slope of drain and waste pipes during vent, wast, and drain installation.

Hole Saw: The plumber will use the hole saw to cut large holes through wood, masonry, and metal. Toothed hole saws are used to cut through wooden items. The abrasive hole saws cut through masonry and metal. The hole saw can be used on water supply lines and ABS drain pipes.

Pipe Cutter: This cutter allows the plumber to cut copper water lines. A plumber will open the tool's mouth, place the copper pipe in the mouth, and then tighten the cutting disc on the pipe's surface. To slice the pipe, the plumber will turn the tool around the pipe repeatedly. Once it slices through the pipe, a clean cut remains which is ready to be sanded and soldered.

Soldering Torch: To use the soldering torch, a plumber opens the control valve, uses a spark to light the torch, and then holds the flame against joints between copper fittings and pipes.

Wrenches: Plumbers use a variety of different types of wrenches in order to tighten and loosen fittings. Pipe wrenches are used to tighten bigger parts of the piping and other types of fittings. Basin wrenches are used to tighten and loosen bolts that are places that are difficult to access.

Screwdrivers: Screwdrivers are used for tightening and loosening a variety of components such as hose clamps, faucet knobs, as well as changing washers, taking appliances apart, and performing other plumbing tasks.

Tubing Cutter: Plumbers will use tubing cutters to make clean and precise cuts in copper tubing. Pipe cutters utilize a sharp wheel that spins around the copper pipe and then embeds in the metal. The result is a precise and clean cut the entire way around the pipe. Joints and fittings can be sealed once the pipes have been cut.

Jigsaws: These saws are used to make cuts in older pipes so that a new section can be installed. Jigsaws make it easier to make cuts in pipes are in area with space restrictions and cutting pipes that are in close proximity to the floor or wall.

Sealants: Plumbers use different types of sealants. Plumber's tape is used on the threads of plumbing pipes and other types of plumbing connections. Other sealants that plumbers will use are silicone caulking and putty compounds. The type they use depends on the type of repair job.

When you have a problem with your plumbing, a professional plumber is essential to ensuring the problem is repaired properly. Plumbers relies on a wide variety of plumbing tools for a variety of plumbing tasks and repair jobs. Each tool performs specific functions to ensure the job is completed efficiently.

What Kinds of Tools Do Plumbers Use?

Plumbers Putty

What Kinds of Tools Do Plumbers Use?

What Kinds of Tools Do Plumbers Use?
What Kinds of Tools Do Plumbers Use?

Plumbers Putty